Publications
Most publications by Environmental Energy Technologies Division authors are searchable from this page, including peer-reviewed publications, book chapters, conference proceedings and LBNL reports.
This publications database is an ongoing project, and not all Division publications are represented here yet.
For additional help see the bottom of this page.
] Filters: Author is Vincent S. Battaglia [Clear All Filters]
"The added economic and environmental value of plug-in electric vehicles connected to commercial building microgrids." In 2nd European Conference on SmartGrids and E-Mobility, October 20 -21, 2010. Brussels, Belgium : LBNL, 2010.
The added economic and environmental value of plug-in electric vehicles connected to commericial building microgrids In 2nd European Conference on SmartGrids and E-Mobility. Bedford Hotel & Congress Centre, Brussels, Belgium, 2010.
"Cathode Performance as a Function of Inactive Materials and Void Fractions." Journal of Electrochemical Society (2010).
"Comparison of Cycling Performance of Lithium Ion Cell Anode Graphites." Journal of The Electrochemical Society 159, no. 5 (2012): A520.
"Comparison of the Performance of LiNi1/2Mn3/2O4 with Different Microstructures." Electrochem. Society 158, no. 9 (2011): A997-A1004.
"Conductive Polymer Binder-Enabled Cycling of Pure Tin Nanoparticle Composite Anode Electrodes for a Lithium-Ion Battery." Journal of the Electrochemical Society 160, no. 6 (2013): A849-A855.
"Effect of Vinylene Carbonate on Graphite Anode Cycling Efficiency." Electrochemical Society 19, no. 25 (2009): 51-57.
"Effects of Various Conductive Additive and Polymeric Binder Contents on the Performance of a Lithium-Ion Composite Cathode." Journal of The Electrochemical Society 155, no. 12 (2008): A887-A892.
"Film Forming Properties of Propylene Carbonate in the Presence of a Quaternary Ammonium Ionic Liquid on Natural Graphite Anode." The Journal of Physical Chemistry C 114, no. 13 (2010): 6182-6189.
"High Performance Hydrogen/Bromine Redox Flow Battery for Grid-Scale Energy Storage." Journal of the Electrochemical Society 159, no. 11 (2012): A1806-A1815.
"Improved Initial Performance of Si Nanoparticles by Surface Oxide Reduction for Lithium-Ion Battery Application." Electrochemical Solid-State Letters 14, no. 5 (2011): A61-A63 .
"Li[Ni1/3Mn1/3Co1/3]O2-based Electrodes for PHEV Applications: An Optimization." ECS Trans. 11 (2008): 1-9.
"Multilayer nanoassembly of Sn-nanopillar arrays sandwiched between graphene layers for high-capacity lithium storage." Energy and Environmental Science (2012).
"Performance of Lithium Ion Cell Anode Graphites Under Various Cycling Conditions." ECS Trans. 13 (2008).
"Plug in Electric Vehicle Interactions with a small office Building: An Economic Analysis Using DER-CAM." In IEEE 2010 Power And Energy General Meeting. Minneapolis, MN, 2010.
"Sythesis and Electrochemical Studies of a layed spheric Ti02 through low temperature solvothermal method." Electrochimica Acta 54 (2009): 4079-4083.
"Toward an Ideal Polymer Binder Design for High-Capacity Battery Anodes." Journal of the American Chemical Society (2013).
If you are unable to locate a publication in this master database, it may not have been ported yet from individual group publications lists. For help in finding publications, try dropping the title or authors into your favorite search engine, or contact the following for help:
Building Technology and Urban Systems: Dane Lay
Energy Analysis and Environmental Impacts: Katie Kirbus
Energy Storage and Distributed Resources: Maya Minamihara
